Techna-Fit Store
Home About Us Contact Us Our Hose Technical Catalogs
Adapters & Fittings Specialty
Automobile Industrial Marine
Hyperline FX

TechnaFit@Twitter Techna-Fit Online Store Techna-Fit on Facebook TechnaFit@Twitter Techna-Fit Online Store Techna-Fit on Facebook TechnaFit@Twitter Techna-Fit Online Store Techna-Fit on Facebook TechnaFit@Twitter Techna-Fit Online Store Techna-Fit on Facebook Hyperline FX Hose image

HYPERLINE FX - Overview

There is a fundamental problem with larger sizes of standard, smooth bore PTFE hose products - as the hose size increases above 1/2", so smooth bore PTFE lined hose become significantly less flexible, and more easily kinked.
One solution is to use a conventional convoluted PTFE lined hose, but the internal convolution make the hose difficult to assemble, and reduces fluid flow rates due to turbulent flow.
Hyperline FX is a new and revolutionary solution to all these problems, providing a unique and patented hose liner design which is flexible in the larger bore sizes, yet which retains a smooth bore.
The advantage of a smooth bore as compared with a convoluted bore is that it is easy clean, and does not create 'turbulent flow', which drastically reduces fluid flow rates.

Stainless Steel Wire Braid (SS Grades)
The braid protects the PTFE liner tube against internal pressure and mechanical abuse.


PROPERTIES FOR HYPERLINE FX HOSE GRADES

Teperatures and Pressures:
Hyperline FX, SS Grades - The MWP listed above should be reduced by 1% for each 1°C above 160°C (1% for each 1.8°F above 320°F) up to a maximum of 260°C (500°F).

 

Vacuum Resistance:
Hyperline FX, SS Grades are fully vacuum resistant up to 130°C (266°F).

 

Excellent Flow Rates:
Compared with conventional convoluted hose designs, Hyperline FX has excellent flow rates due to the smooth bore, which prevents the turbulent fluid flow which occurs in convoluted hose products.

 

Reduced Diffusion Rates:
Hyperline FX is much more resistant to diffusion of liquids or gases than other PTFE hose products, due to its highly compressed, non-porous PTFE matrix. Hyperline FX has been successfully tested to SAE J1737 for resistance to automotive fuel diffusion.

 
Non-Stick Internal Surface:
Hyperline FX hose has a smooth bore, non-stick liner which is effectively 'self-cleaning', and which resists material build-up inside the hose which may cause bore constriction.

SPECIFICATIONS FOR HYPERLINE FX HOSE GRADES
Nominal Hose Size *Actual Hose Bore Size Hose Grade Outside Diameter of Tube or Braid Minimum Bend Radius Maximum Working Pressure (MWP) Weight per Unit Length Techn-Fit Part Number
in mm in   mm in mm in Bar psi kg/mtr lbs/ft
1/4 6.8 0.270 SS 9.6 0.378 19 3/4 88 1280 0.092 0.062 500-04
5/16 7.9 0.312 SS 10.6 0.420 19 3/4 84 1220 0.126 0.084 500-05
3/8 10.0 0.394 SS 13.5 0.534 25 1 80 1160 0.160 0.067 500-06
1/2 13.6 0.536 SS 17.5 0.690 38 1-1/2 60 870 0.225 0.151 500-08
5/8 16.7 0.658 SS 21.4 0.843 50 2 50 730 0.336 0.255 500-10
3/4 19.8 0.780 SS 24.2 0.953 63 2-1/2 42 610 0.179 0.257 500-12
1 26.4 1.04 SS 31.7 1.250 75 3 40 580 0.540 0.362 500-16
*Hydraulic Bore Size - The actual bore sizes of Hyperline FX hose are slightly larger than the nominal size.

APPLICATIONS
• Autoclaves • Gases • Packaging • Tire Presses
• Automotive • Ground Support/Test • Paints • Trucks
• Buses • High Performance Racing • Power Generation • Turbines
• Chemicals & Acids • Hot Melt • Pulp & Paper • Water Blast
• Chlorine • Hot Presses • Pumps • Water Purification
• Compressed Gas • Hydraulic Systems • Reverse Osmosis  
• Dehydrators • Lubricants • R.I.M.  
• Engines • Machinery • Steel/Aluminum  
• Food Processing • Manufacturing • Steam Lines  
• Fuel • Molten Plastics • Textiles  

LinkedIn Page Like Us on Facebook Like Us on Facebook